Meridian Labs - Engineering Inquiry Form

CONTACT US

Meridian Laboratory
2415 Pleasant View Rd.
Middleton, WI 53562

PHONE
608.836.7571
800.837.6010

FAX
608.831.0300

EMAIL US

The following is an Engineering Inquiry form that you can fill out online. Please provide as much information as possible. We are happy to work with as little or as much information as you can provide. However, the more complete your response, the more thorough our analysis. (See our Privacy Policy.)

* Name:

* Company:

Address:

City:

State:

Zipcode:

* Country:

* Phone:

* Fax:

* Email:

Brief description of application:

Description of the type of equipment ROTOCON will be used on:

* Approximate number of units required:

Select which category best describes your application:

Commercial
Industrial
Military/Aerospace
Other (describe below)

This appplication is:

New Retrofit/Replacement

ROTOCON models of particular interest:

MM - Miniature size, multi contact	MC - Single contact, high current capacity
MX - Standard ROTOCON series	MXP - Multi-contact, high current capacity
MY - Increased number of contacts	MXT - Multi-contact, thru-shaft mounting
MZ - Largest number of contacts	MCT - Single contact, high current capacity, thru-shaft mounting

Please tell us specifics about your application..

Mechanical Requirements:

Maximum ROTOCON installation Space:

= Diameter

= Length

Life & Usage:

Estimated annual usage:

Estimated life of program:

Price target:

Production start/Delivery time frame:

Mechanical specifications:

Mounting specifications:

Wear (life):

Years (or hours)

At duty cycle

Sealing:

None	Dust
Submersion	Water spray

Rotational speed:

Normal

Maximum

**Electrical Requirements:**
Total Contacts/Channels:
	1	2	3
Number of Contacts:
Voltage V:
Voltage mV:
Specify AC/DC:
Current A:
Current mA:
Frequency Hz:
Rotating Sensors & Equipment:
Thermocouple (type):
Strain Gage:
Heater:
Other Transducers:

**Electrical Connection Requirements:**
Shaft Leadwires Type of Wire:	(Standard is MIL-W-16878, stranded copper wire with nickel plating, teflon insulation, and protective sleeving.)
Shaft Leadwires Length:	(specify inches or feet)
Shaft Connector:	(optional - specify type)
Housing Connector:	(optional - specify type) Note: Threaded terminal posts with wire crimp terminals are standard on most ROTOCON models.

**Environmental Requirements:**
Ambient Temperature range:	° F
Temperature of Shaft:	° F (shaft to which ROTOCON is connected)
Average Relative Humidity:	%
Air Contamination:	(if any - specify components)
Nature of Vibration:	(if any)

Thank you for your interest in ROTOCON rotary electrical contacts.