Name:

Company:

Address:

City:

State:

Zipcode:

Country:

Phone:

Fax:

Email:

How did you find us?

Brief description of application:

Description of the type of equipment ROTOCON will be used on:

Approximate number of units required:

ROTOCON models of particular interest:

Speed Range (in RPM):

Maximum ROTOCON installation Space:

= Diameter

= Length

ROTOCON Mounting Configurations
Indicate the mounting configuration which best suits you application and include important dimensions. Special mounting configurations are available upon request.

End-of shaft mounting.

I. D.=

Double end-of shaft mounting.

Left I. D.=

Right I. D.=

Housing mount.

I. D.=

Flange mounting.

Dia.=

Thru-shaft mounting.

Shaft O.D..=

Base mounting.

I. D.=

Total Contacts/Channels:   

A

B

C

Number of Contacts:

Voltage V:

Voltage mV:

Voltage µV:

Current A:

Current mA:

Current µA:

Frequency Hz:

Frequency KHz:

Frequency MHz:

Rotating Sensors & Equipment:

Thermocouple (type):

Strain Gage:

Heater:

Other Transducers:

Shaft Leadwires
Type of Wire:

(Standard is MIL-W-16878, stranded copper wire with nickel plating, teflon insulation, and protective sleeving.)

Shaft Leadwires
Length:

(if more than 12")

Shaft Connector:

(optional - specify type)

Housing Connector:

(optional - specify type)

Note: Threaded terminal posts with wire crimp terminals are standard on most ROTOCON models.

Ambient Temperature range:

Temperature of Shaft:

° F (shaft to which ROTOCON is connected)

Average Relative Humidity:

%

Air Contamination:

(if any - specify components)

Nature of Vibration:

(if any)